What if there is moisture in the underlay?
Our floors are water-resistant, but the surface must always be checked for damp problems. In this case, the surface will need to be made moisture-tight before the floor is installed. Damp under the floor can cause harmful mould or cause the floor to billow.
SOME POINTS FOR ATTENTION WHEN LAYING SCREED OR CONCRETE:
Make sure that freshly poured concrete or screed has sufficient time to dry. Keep in mind the following percentages. Always go through the heating protocol. Measure, document and keep the results of moisture measurements.
The maximum residual moisture percentage in the subfloor:
| / | Cement | Anhydrite | wood |
|---|---|---|---|
| No underfloor heating (CM) | <2% | <0,5% | <10% |
| With underfloor heating (CM) | <1,5% | <0,3% | Not applicable |
TIP: Make sure that the room is always well ventilated.
Renovation
- Can you install a rigid vinyl floor over an existing floor with underfloor heating?
- Can you install a rigid vinyl floor on a fixed carpet?
- Can you install a rigid vinyl floor on floating lioleum?
- Will it work with my existing skirtings?
- What if there are uneven surfaces?
- Can you install a rigid vinyl floor on floating laminate?
- Can you install a rigid vinyl floor on an existing vinyl floor?
- Can you install a rigid vinyl floor on glued laminate?
- Is Floorify vinyl floor suitable for renovations?
- What if there is moisture in the underlay?
- Can you install a rigid vinyl floor on glued or nailed parquet?
- Can you install a rigid vinyl floor on glued linoleum?
- What is a renovation floor?
- Can you install Floorify on any surface?
- Can I install a rigid vinyl floor on a tiled floor?
- How can I best protect my floor during a renovation?
- On what existing floors can I install a Floorify vinyl Floor?
- Can you install a rigid vinyl floor on a plank floor?
- Do I need an underlay for my stair renovation?
- How can you easily renovate your stairs?